鏡像下載：http://cdimage.ubuntu.com/releases/

1.1 選擇安裝語言：

1.2 安裝界面選擇第一項進行系統安裝

1.3 選擇安裝過程中使用的語言，也是系統安裝完后使用的默認語言

1.4 選擇地區，這里先選擇最后一項other，然后回車再選擇Asia，最后選擇China

 

 

1.5 選擇語言環境

1.6 鍵盤布局檢查，選擇NO

1.7 選擇美式鍵盤

1.8 確認使用美式鍵盤

1.9 配置主機名

1.10 創建一個普通用戶和為其設置密碼

1.11 確認時區

1.12 選擇磁盤分區的方法，這里選手動分區

1.13 選擇磁盤

1.14 確認對磁盤分區

1.15 對磁盤分區

1.16 創建新分區

1.17 指定分區大小，這里將磁盤的全部大小劃分給該分區

1.18 選擇分區類型，這里選主分區

1.19 分區完成

1.20 完成分區并寫入數據

1.21 確認寫入磁盤

1.22 是否使用代理，這里不填

1.23 是否自動更新，這里選擇默認，不自動更新

1.24 選擇安裝組件，選擇對應需要安裝的組件，然后按空格鍵，這里選擇OpenSSH Server

1.25 將GRUB引導加載程序安裝到主引導記錄

1.26 完成安裝，確認重啟服務器

1.27 登錄系統

2 系統基礎配置

官方文檔：https://help.ubuntu.com/

2.1 更改主機名

# cat /etc/hostname 
hechunping

2.2 更改網卡名稱為eth*

# sed -i \\\'/GRUB_CMDLINE_LINUX=/s/$/net.ifnames=0 biosdevname=0/\\\' /etc/default/grub
# update-grub
Sourcing file `/etc/default/grub\\\'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.15.0-55-generic
Found initrd image: /boot/initrd.img-4.15.0-55-generic
done
# reboot
# sed -i \\\'s/ens33/eth0/\\\' /etc/netplan/01-netcfg.yaml

2.3 配置root遠程登錄

# 默認情況下，ubuntu不允許root⽤⼾遠程ssh，如果有實際場景需要允許root⽤⼾遠程ssh，則需要設置root密碼，并且編輯/etc/ssh/sshd_config⽂件修改如下：
~$ sudo vim /etc/ssh/sshd_config
32 #PermitRootLogin prohibit-password #默認為禁⽌登錄
33 PermitRootLogin yes #改為允許登錄

57 #PasswordAuthentication yes
58 PasswordAuthentication yes #打開密碼認證，其實默認就是允許通過密碼認證登錄

~$ sudo su - root #切換到root⽤⼾環境
~# passwd #設置密碼
Enter new UNIX 
Retype new UNIX 
passwd: password updated successfully
~# systemctl restart sshd #重啟ssh服務并測試root⽤⼾遠程ssh連接

2.4 網絡配置

官方文檔：https://netplan.io/

Ubuntu 從 17.10 開始，已放棄在 /etc/network/interfaces ⾥固定IP的配置，⽽是改成 netplan ⽅式，配置⽂件是：/etc/netplan/01-netcfg.yaml

# ubuntu 17.04及之前的靜態IP配置⽅式：
~# cat /etc/network/interfaces
root@hechunping:~# cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
auto eth0 #⽹卡⾃啟動，寫⾃⼰要配置IP的實際⽹卡名稱
iface eth0 inet static #配置靜態IP，寫⾃⼰要配置IP的實際⽹卡名稱
address 172.18.3.12 #IP地址
netmask 255.255.0.0 #掩碼
gateway 172.18.0.1 #⽹關
dns-nameservers 223.6.6.6 #DNS
dns-nameservers 223.5.5.5
#重啟⽹絡服務
~# /etc/init.d/networking restart
~# systemctl restart networking.service

2.4.1 單網卡靜態IP地址

root@hechunping:~# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
   addresses: [192.168.7.132/24]
   gateway4: 192.168.7.2
   nameservers:
    addresses: [223.6.6.6]
root@hechunping:~# netplan apply

2.4.2 配置多網卡靜態IP

# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6]
  eth2:
   dhcp4: no
   addresses: [192.168.7.34/24]
   routes:
    - to: 172.20.0.0/16
     via: 192.168.7.2
# netplan apply

2.4.3 單網卡橋接

# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
 bridges:
  br0:
   dhcp4: no
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6]
   interfaces:
    - eth0
# netplan apply

2.4.4 多網卡橋接

將br0和br1分別橋接到eth0和eth2。
# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
  eth2:
   dhcp4: no
 bridges:
  br0:
   dhcp4: no
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6]
   interfaces:
    - eth0
  br1:
   dhcp4: no
   addresses: [192.168.7.34/24]
   routes:
    - to: 172.20.0.0/16
     via: 192.168.7.2
   interfaces:
    - eth2
root@hechunping:~# netplan apply

2.4.5 雙網卡綁定

需要提前安裝好bridge命令，兩塊網卡使用同一種網絡模式
# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
  eth2:
   dhcp4: no
 bonds:
  bond0:
   interfaces:
    - eth0
    - eth2
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6,223.5.5.5]
   parameters:
    mode: active-backup
    mii-monitor-interval: 100
# poweroff
# netplan apply

2.4.6 雙網卡綁定 橋接

⽹卡綁定⽤于提供⽹卡接⼝冗余以及⾼可⽤和端⼝聚合功能，橋接⽹卡再給需要橋接設備的服務使⽤。

# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
  eth2:
   dhcp4: no
 bonds:
  bond0:
   interfaces:
    - eth0
    - eth2
   parameters:
    mode: active-backup
    mii-monitor-interval: 100
 bridges:
  br0:
   dhcp4: no
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6,223.5.5.5]
   interfaces:
    - bond0
# netplan apply

2.4.7 內外多網卡綁定

多⽹絡情況下實現⽹卡綁定。這里使用橋接(eth0,eth2)和NAT(eth3,eth4)兩種網絡模式
# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
  eth2:
   dhcp4: no
  eth3:
   dhcp4: no
  eth4:
   dhcp4: no
 bonds:
  bond0:
   interfaces:
    - eth0
    - eth2
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6,223.5.5.5]
   parameters:
    mode: active-backup
    mii-monitor-interval: 100

  bond1:
   interfaces:
    - eth3
    - eth4
   addresses: [192.168.7.34/24]
   parameters:
    mode: active-backup
    mii-monitor-interval: 100
   routes:
    - to: 172.20.0.0/16
     via: 192.168.7.2
# netplan apply

2.4.8 內外多網卡綁定 橋接

# cat /etc/netplan/01-netcfg.yaml 
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
 version: 2
 renderer: networkd
 ethernets:
  eth0:
   dhcp4: no
  eth2:
   dhcp4: no
  eth3:
   dhcp4: no
  eth4:
   dhcp4: no
 bonds:
  bond0:
   interfaces:
    - eth0
    - eth2
   parameters:
    mode: active-backup
    mii-monitor-interval: 100

  bond1:
   interfaces:
    - eth3
    - eth4
   parameters:
    mode: active-backup
    mii-monitor-interval: 100
 bridges:
  br0:
   dhcp4: no
   addresses: [172.20.7.34/16]
   gateway4: 172.20.0.1
   nameservers:
    addresses: [223.6.6.6,223.5.5.5]
   interfaces:
    - bond0
  br1:
   dhcp4: no
   addresses: [192.168.7.34/24]
   routes:
    - to: 172.20.0.0/16
     via: 192.168.7.2
   interfaces:
    - bond1
# netplan apply

3 軟件包管理

3.1 修改軟件倉庫地址

阿⾥云倉庫地址：https://developer.aliyun.com/mirror
中科⼤：http://mirrors.ustc.edu.cn/help/ubuntu.html
清華⼤學：https://mirror.tuna.tsinghua.edu.cn/help/ubuntu/
華為：https://mirrors.huaweicloud.com/

###### 清華源配置 ######
Ubuntu 的軟件源配置文件是 /etc/apt/sources.list。將系統自帶的該文件做個備份，將該文件替換為下面內容，即可使用 TUNA 的軟件源鏡像。
# cd /etc/apt/
# cp -p sources.list sources.list.bak
# vim sources.list
# 默認注釋了源碼鏡像以提高 apt update 速度，如有需要可自行取消注釋
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic main restricted universe multiverse
# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic main restricted universe multiverse
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-updates main restricted universe multiverse
# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-updates main restricted universe multiverse
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-backports main restricted universe multiverse
# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-backports main restricted universe multiverse
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-security main restricted universe multiverse
# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-security main restricted universe multiverse

# 預發布軟件源，不建議啟用
# deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-proposed main restricted universe multiverse
# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-proposed main restricted universe multiverse
# apt update #更新本地軟件包列表索引，修改了apt倉庫后必須執⾏

###### 阿里源配置 ######
# sed -i \\\'s/cn.archive.ubuntu/mirrors.aliyun/\\\' /etc/apt/sources.list
# apt update #更新本地軟件包列表索引，修改了apt倉庫后必須執⾏

3.2 apt工具使用

apt list #apt列出倉庫軟件包，等于yum list
apt search NAME #搜索安裝包
apt show apache2 #查看某個安裝包的詳細信息
apt install apache2 #在線安裝軟件包
apt remove apache2 #卸載單個軟件包但是保留配置⽂件
apt autoremove apache2 #刪除安裝包并解決依賴關系
apt update #更新本地軟件包列表索引，修改了apt倉庫后必須執⾏
apt purge apache2 #卸載單個軟件包刪除配置⽂件
apt upgrade #升級所有已安裝且可升級到新版本的軟件包
apt full-upgrade #升級整個系統，必要時可以移除舊軟件包。
apt edit-sources #編輯source源⽂件
apt-cache madison nginx #查看倉庫中軟件包有哪些版本可以安裝
apt install nginx=1.14.0-0ubuntu1.6 #安裝軟件包的時候指定安裝具體的版本

3.3 dpkg安裝包管理

rpm：RPM(Red Hat Package Manager)，是基于Red hat的Linux Distribution的包管理系統，同時也指rpm包本⾝，RPM⽤于rpm包的管理（諸如安裝、卸載、升級等）
dpkg 是Debian Packager 的簡寫,為 Debian專⻔開發的套件管理系統，⽅便軟件的安裝、更新及移除。所有源⾃“Debian”的“Linux ”發⾏版都使⽤ “dpkg”，例如 “Ubuntu”、“Knoppix ”等。

dpkg -i gitlab-ce_11.9.8-ce.0_amd64.deb #安裝某個軟件包
dpkg -r gitlab-ce #刪除某個軟件包保留配置⽂件
dpkg -r -P gitlab-ce #刪除某個軟件包不保留配置⽂件
dpkg -I gitlab-ce_11.9.8-ce.0_amd64.deb #查看軟件包信息
dpkg -c gitlab-ce_11.9.8-ce.0_amd64.deb #查看軟件包內的⽂件及⽬錄內容
dpkg -l #列出本機已經安裝的所有軟件

3.4 設置oracle JDK環境

# pwd
/usr/local/src
解壓⼆進制⽂件并設置軟連接：
# tar xf jdk-8u212-linux-x64.tar.gz
# ln -sv /usr/local/src/jdk1.8.0_212 /usr/local/jdk
配置環境變量：
# vim /etc/profile
export JAVA_HOME=/usr/local/jdk
export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATH
export CLASSPATH=.$CLASSPATH:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$JAVA_HOME/lib/tools.jar
重新導⼊環境變量并驗證：
# source /etc/profile
# java -version
java version 1.8.0_212
Java(TM) SE Runtime Environment (build 1.8.0_212-b10)
Java HotSpot(TM) 64-Bit Server VM (build 25.212-b10, mixed mode)

3.5 安裝OpenJDK

# apt install openjdk-8-jdk

3.6 安裝常⽤系統命令

# apt purge ufw lxd lxd-client lxcfs lxc-common
# apt install iproute2 ntpdate tcpdump telnet traceroute nfs-kernel-server nfs-common lrzsz tree openssl libssl-dev libpcre3 libpcre3-dev zlib1g-dev ntpdate tcpdump telnet traceroute gcc openssh-server lrzsz tree openssl libssl-dev libpcre3 libpcre3-dev zlib1g-dev ntpdate tcpdump telnet traceroute iotop unzip zip

3.7 系統資源限制優化

#cat /etc/security/limits.conf
#root賬⼾的資源軟限制和硬限制
root soft core unlimited
root hard core unlimited
root soft nproc 1000000
root hard nproc 1000000
root soft nofile 1000000
root hard nofile 1000000
root soft memlock 32000
root hard memlock 32000
root soft msgqueue 8192000
root hard msgqueue 8192000
#其他賬⼾的資源軟限制和硬限制
* soft core unlimited
* hard core unlimited
* soft nproc 1000000
* hard nproc 1000000
* soft nofile 1000000
* hard nofile 1000000
* soft memlock 32000
* hard memlock 32000
* soft msgqueue 8192000
* hard msgqueue 8192000

3.8e 內核參數優化

# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
# Controls the default maxmimum size of a mesage queue
kernel.msgmnb = 65536
# # Controls the maximum size of a message, in bytes
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# # Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
# TCP kernel paramater
net.ipv4.tcp_mem = 786432 1048576 1572864
net.ipv4.tcp_rmem = 4096 87380 4194304
net.ipv4.tcp_wmem = 4096 16384 4194304
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_sack = 1
# socket buffer
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.core.netdev_max_backlog = 262144
net.core.somaxconn = 20480
net.core.optmem_max = 81920
# TCP conn
net.ipv4.tcp_max_syn_backlog = 262144
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
# tcp conn reuse
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_tw_reuse = 0
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_fin_timeout = 1
net.ipv4.tcp_max_tw_buckets = 20000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.tcp_synack_retries = 1
net.ipv4.tcp_syncookies = 1
# keepalive conn
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_keepalive_intvl = 30
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.ip_local_port_range = 10001 65000
# swap
vm.overcommit_memory = 0
vm.swappiness = 10
#net.ipv4.conf.eth2.rp_filter = 0
#net.ipv4.conf.lo.arp_ignore = 1
#net.ipv4.conf.lo.arp_announce = 2
#net.ipv4.conf.all.arp_ignore = 1
#net.ipv4.conf.all.arp_announce = 2

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持三五互聯。

更多關于云服務器，域名注冊，虛擬主機的問題，請訪問三五互聯官網：m.shinetop.cn

贊(0)
聲明：本網站發布的內容（圖片、視頻和文字）以原創、轉載和分享網絡內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。郵箱：3140448839@qq.com。本站原創內容未經允許不得轉載，或轉載時需注明出處：三五互聯知識庫 » Ubuntu18.04 Server版安裝及使用(圖文)

登錄

找回密碼

注冊

主站蜘蛛池模板： 亚洲性日韩精品一区二区| 日本亚洲一区二区精品久久| 亚洲综合伊人久久大杳蕉| 少妇私密会所按摩到高潮呻吟| 极品白嫩少妇无套内谢| 国产极品粉嫩学生一线天| 国产亚洲精品第一综合另类灬| 国产av中文字幕精品| 国产免费午夜福利蜜芽无码| 国产精品 视频一区 二区三区| 亚洲av不卡电影在线网址最新| 一区二区三区四区高清自拍| 猫咪AV成人永久网站在线观看| 国产乱人伦真实精品视频| 久久综合伊人77777| 欧美一区内射最近更新| 色成人亚洲| 在线 国产 欧美 专区| 亚洲小说乱欧美另类| 久久久久成人精品无码中文字幕| 亚洲男人天堂2021| 欧美精欧美乱码一二三四区| 亚洲视频一区| 中文字幕有码无码AV| 五大连池市| av中文无码乱人伦在线观看| 公天天吃我奶躁我的在| 国产亚洲av夜间福利香蕉149| 亚洲av免费成人精品区| 在厨房拨开内裤进入在线视频| 人妻精品人妻无码一区二区三区| 亚洲熟女精品一区二区| 中文日产幕无线码一区中文| 久久精品国产午夜福利伦理 | 国模精品视频一区二区三区| 亚洲一区二区av免费| 日韩成人无码影院| 丰满熟妇人妻中文字幕| 久久精品夜夜夜夜夜久久 | 中文字幕av无码免费一区| 少妇伦子伦精品无吗|